Downstream – NEMO^® Water-Injection Pump

NEMO^® Water-Injection Pumps ensure that your oil is flowing in the right direction!

General

Crude oil deposits are often discovered in spongy rock. To extract it, fluids must be pumped into the earth under high pressures. NEMO^® Water-Injection Pumps are particularly well-suited for this task, since their capacity can be changed in accordance with rotation speed.

Features of NEMO^® Water-Injection Pumps:

high pressure stability
low-pulsation conveyance
high suction capability

NEMO^® Water-Injection Pumps offer you:

low life cycle costs
low installation costs
high efficiency

Advantages of the NEMO^® Water-Injection Pump

can be operated under high conveying pressures
capable of pumping a great variety of substances
capacities are adjustable

Technique

Our Design – Your Advantage: Easy Serviceability, Dependability, Operating Safety

Questionaire

1 Rotor
In wear- and corrosion-resistant designs.

2 Stator
Vulcanized into the tube with sealing on both sides in a variety of elastomers, plastics and metals. Stator inlet with hopper-shaped opening for improved feed of the product into the conveying chamber. The stator is oil-, acid- and alkali-resistant.

3 Drive Chain
Coupling rod and two gimbal joints for the transmission of power from the drive to the rotor.

4 Shaft Seals
Standard with single-acting, bi-directional, wear-resistant mechanical seal. Upon request, with single- or double-acting mechanical seals of varied designs and from various manufacturers, cartridge and special seals as well as packed glands.

5 Suction and Discharge Housing
Flange and threaded connections in accordance with DIN and international standards. Materials in cast iron, steel, chrome-nickel-steel rubberized; also special materials upon request.

6 Bearing Block with Free Shaft Extension
Large double bearing ensures a high level of shaft stability and thereby ideal conditions for a great variety of mechanical seals. The free shaft extension makes it possible to use any drive type including diesel and hydraulic drives.

The NETZSCH NEMO^® Water-Injection Pump is available in …

cast iron
chrome-nickel-steels
duplex and super-duplex steels
Hastelloy
titanium
special materials

... conveys …

capacities from a few ml/h to 20 m³/h
pressures of up to 240 bar

…and offers a great variety of shaft seals such as:

packed glands
shaft sealing rings
single-acting, bi-directional mechanical seals with and without quench
double-acting mechanical seals (tandem and back-to-back)
thermosiphon systems

Certification / Credentials

DIN ISO 9001
Certification in accordance with § 19 WHG
ATEX Directive
GOST R and GOST K
Material certifications
Test reports
Welding certificates
Non-destructive material testing
Sound level measurement
Quality plans
Progress reports
Other certification and credentials upon request

Applications

Downstream – NEMO^® Water-Injection Pumps

Adjustable, dependable, optimal – NEMO^® Water-Injection Pumps

The NEMO^® Water-Injection Pump can be used for conveying pressures up to 240 bar, regardless of the properties of the fluid. The construction materials make operation with either smearing or non-smearing products equally unproblematic.

Wide Spectrum of Applications
The NEMO^® Water-Injection Pump is used primarily for substances with the following properties…

low to high viscosity
thixotropic and dilatant
shear-sensitive
abrasive
non-smearing or smearing
aggressive (pH 0 to 14)
adhesive
toxic

… such as

water with chemical additives
oil/water emulsions
water in oil deposits

Additional Features of the NEMO^®Water-Injection Pump:

high suction capability up to 9 mWC
bi-directional
vertical or horizontal installation
low noise, low vibration
temperatures from -40°C to 120°C

Accessories

Accessories to supplement your system offer optimal security

The following accessories are available for NETZSCH NEMO^® Water-Injection Pumps:

A great assortment of shaft sealing systems planned in accordance with API 682 and seal sizes in accordance with API 610
Systems for monitoring the conveying pressure
Dry running protection units
Safety valves
Electrical control systems
Bypass lines
Application-specific baseplates
A great variety of drive systems

Literature

Brochure

Partnership in the Oilfields

You may also be interested in:

TORNADO^® Industrial Rotary Lobe Pumps T2

The TORNADO^® rotary lobe pump is a positive displacement pump. The pumping action is generated by the contra-rotation of two rotors within the pump chamber which are synchronised externally. The media enters the pump chamber through the inlet port and is carried around the chamber by the rotors to the outlet port where it is discharged.

Dependable conveyance with no overflow

NEMO^® Immersible Pumps are used for emptying barrels, tanks, and pits. They are also used where space is limited and the danger of cavitation may be present. In addition, these pumps are suitable for emptying barrels containing materials hazardous to water and the environment.

Downstream – NEMO^® Multiphase Pumps

Only very seldom does crude oil arrive at the surface in pure form. Usually it is mixed with water, sand and gas. Conventional pumps require that the gas first be separated from the crude oil. With NETZSCH NEMO^® Multiphase Pumps, this is not an issue. NEMO^® Multiphase Pumps can be used for crude oil with a gas content of up to 100%.